1n4001gp thru 1n4007gp vishay general semiconductor document number: 88504 revision: 02-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 glass passivated junction rectifier features ? superectifier structur e for high reliability application ? cavity-free glass-passivated junction ? low forward voltage drop ? low leakage current, typical i r less than 0.1 a ? high forward surge capability ? meets environmental standard mil-s-19500 ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for both consumer and automotive applications. mechanical data case: do-204al, molded epoxy over glass body epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: color band denotes cathode end primary characteristics i f(av) 1.0 a v rrm 50 v to 1000 v i fsm 30 a i r 5.0 a v f 1.1 v t j max. 175 c patented* do-204al (do-41) ? *glass encapsulation technique is covered by patent no. 3,996,602, brazed-lead assembly to patent no. 3,930,306 note: (1) jedec registered values maximum ratings (t a = 25 c unless otherwise noted) parameter symbol 1n4001gp 1n4002gp 1n4003g p 1n4004gp 1n4005gp 1n4006gp 1n4007gp unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage (1) v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage (1) v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current 0.375" (9.5 mm) lead length at t a = 75 c (1) i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (1) i fsm 30 a maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length t a = 75 c (1) i r(av) 30 a operating junction and storage temperature range (1) t j , t stg - 65 to + 175 c
1n4001gp thru 1n4007gp vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88504 revision: 02-apr-08 2 note: (1) jedec registered values note: (1) thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, p.c.b. mounted note: (1) automotive grade aec q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol 1n4001gp 1n4002gp 1n4003gp 1n4004gp 1n4005gp 1n4006gp 1n4007gp unit maximum instantaneous forward voltage 1.0 a v f 1.1 v maximum dc reverse current at rated dc blocking voltage (1) t a = 2 5 c t a = 125 c i r 5.0 50 a typical reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 2.0 s typical junction capacitance 4.0 v, 1 mhz c j 8.0 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol 1n4001gp 1n4002gp 1n4003gp 1n4004gp 1n4005gp 1n4006gp 1n4007gp unit typical thermal resistance (1) r ja r jl 55 25 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode 1n4004gp-e3/54 0.335 54 5500 13" diameter paper tape and reel 1n4004gp-e3/73 0.335 73 3000 ammo pack packaging 1n4004gphe3/54 (1) 0.335 54 5500 13" diameter paper tape and reel 1n4004gphe3/73 (1) 0.335 73 3000 ammo pack packaging
1n4001gp thru 1n4007gp vishay general semiconductor document number: 88504 revision: 02-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. forward current derating curve figure 2. maximum non-repetitive peak forward surge current figure 3. typical instantaneous forward characteristics 0 0 25 50 75 100 125 150 175 0.2 0.4 0.6 0. 8 1.0 0.375" (9.5 mm) lead length 60 hz resisti v e or ind u cti v e load am b ient temperat u re (c) a v erage for w ard rectified c u rrent (a) 5 10 1 100 10 15 20 25 30 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = t j max. 8 .3 ms single half sine- w a v e 0.6 0. 8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 100 t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) figure 4. typical reverse characteristics figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0 0.01 0.1 1 10 60 8 0 100 20 40 t j = 100 c t j = 25 c percent of rated peak re v erse v oltage (%) instantaneo u s re v erse c u rrent ( a) 0.1 10 1 100 1 10 100 re v erse v olta g e ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p 0.01 0.1 10 1 100 0.1 10 100 1 transient thermal impedance (c/ w ) t - p u lse d u ration (s)
1n4001gp thru 1n4007gp vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88504 revision: 02-apr-08 4 package outline dimensions in inches (millimeters) do-204al (do-41) 1.0 (25.4) mi n . 1.0 (25.4) mi n . 0.205 (5.2) 0.160 (4.1) 0.107 (2.7) 0.0 8 0 (2.0) dia. 0.034 (0. 8 6) 0.02 8 (0.71) dia. note: lead diameter is for s u ffix ?e? part n u m b ers 0.026 (0.66) 0.023 (0.5 8 )
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
